On Time Home Experts

  1. Prepare all the tools and equipment next to the door entrance, we do this method
    because many times during the cleaning process you will want to reach back to your
    tools and this way it will create an easy working method that you will not forget any tools
    and it will be easy for you to remember where you left any equipment or tool that you will
    need during this process, once you finish this step, you immediately turn off the AC only
    through the thermostat and switch the fan from auto to OFF, this will insure the safety of
    yourself and the AC.

  2. Planning the cleaning process, this is a VERY important step, you never start a cleaning
    process without planning it before you start, this will assure your performance on the
    highest level, leaving you stress free and completely understanding on your next step on
    the process, saving you time and energy!

  3. Once you plan the cleaning process,you will place plastic covers on all the areas that will
    be affected from the process of the cleaning, now you can place all the tools and
    machinery in their designated starting point.

  4. Once the preparation covers was placed, now we can hook up the negative pressure.
    Once you hook up the machine you can place the snakebrush through a small opening
    window you leave or you can stick it through one of the designated holes that is created
    through the square cover of the pogo poll.

  5. During the the cleaning process, you must pay attention to the snake brush so it will not
    tangle, keep it straight as possible as a lead way to the duct, when you brush you start
    slowly and safely, if you feel in the process the snake is difficult to advance further, do
    not use force as you can damage the duct inside or another possibility is you have
    reached the plenum box or the return box, you will want to avoid penetrating the snake
    brush to the unit boxes as it can damage them as well, gently try to pass over the difficult
    part.

  6. Once done with cleaning you can now process with the antimicrobial treatment,
    antimicrobial treatment is applied through the plenum box, only if no option left you apply
    it through the return box and making sure the unit is not working and paying attention it
    will not be in the direction of the electronic of the AC, any kind of liquid material can
    damage the AC Board and burn the AC resulting in thousands of dollars of damage, in
    case you will need to apply antimicrobial duct by duct for cases of mildew you can apply
    it after each duct you done deep cleaning.
Call Now Button